How to hem your pants

“On a hard, flat floor, wearing the shoes you plan on wearing with your pants, take a ruler and measure up from the floor,” says Jennifer Dayan, founder of online shopping destination I Found A Secret. Then fold under exactly where you want the hem to be, making sure the fabric is even all the way around. Grab a friend or family member to help you with this step if you’re having trouble alone.

Once you have the fold exactly where you want it to be and are positive it’s even, pin all the way around, with the ruler measuring the same distance between the floor and the hem, advises Jennifer. This will help ensure that you don’t make any mistakes and that both pant legs come out the same length. Check your work in the mirror and adjust any pins as necessary before moving on to the next step.

Now that you have the right length, take off your pants. From the inside, press up and down (not sideways) with a hot iron to form a crease where the new hem should be, says Jennifer. “Then remove the pins, and turn your pants inside out.”

At this point, if you have a sewing machine, you can sew all the way around (being sure to cut away the excess fabric first) and re-iron the finished hem flat. “Or, if you’re like me and sewing isn’t exactly your strong point, you can go with one of two other options,” says Jennifer. You can use HeatnBond’s Super Weight Iron-On Hem Adhesive, which is available at most fabric stores and comes in a roll, or you can apply two to three strips of Hollywood Fashion Secrets Temporary Hem Tape (available at IFoundASecret.com), which requires no ironing at all and is non-committal to any specific shoe, heel or flat. The latter is probably your best option if you plan on wearing your new pants with a variety of different heel heights.